Page 1 of 1

VOLUME CONTROLLER FOOT SWITCH

PostPosted: 10 Sep 2013 11:47
by golfer
Help please
Trying to fit volume controller to a PA3X it is a Yamaha controller used on a Tyros 2 when i get to the settings foot down then enter foot up then enter i get error code out of range.I have been told that this foot switch should work hope you can help.
Bill

Re: VOLUME CONTROLLER FOOT SWITCH

PostPosted: 10 Sep 2013 12:13
by jackoj
Hi Bill,
It should work OK, 1/Global-controllers-Function =Master Volume then follow instruction on screen. hope it helps.jackoj. :)

Re: VOLUME CONTROLLER FOOT SWITCH

PostPosted: 10 Sep 2013 13:36
by Mike Bracchi
Hiya Bill,

I use the Yamaha FC5 Sustain Pedal/Footswitch from my old S900 on the Korg and works fine ... but I did have to do some fiddling about to get it to do what I wanted (in my case I use it to change the style variations) just as John has mentioned ... :wink:

Mike

Re: VOLUME CONTROLLER FOOT SWITCH

PostPosted: 10 Sep 2013 14:31
by Wally Gator
Don't you have to set the polarity somehow? I have that option on my S910 in Function/Controller. Maybe your keyboard has something similar.

Re: VOLUME CONTROLLER FOOT SWITCH

PostPosted: 11 Sep 2013 16:51
by golfer
Hi Jackoj Mike and Wally
Thank you all for the info have not tryed it yet i will let you know if the problem has been fixed.
Manny Thanks
Bill

Re: VOLUME CONTROLLER FOOT SWITCH

PostPosted: 15 Sep 2013 18:48
by golfer
Hi John Mike and Wally
Found out how to fix my volume thank you all for the help i have a new question has any body worked out the encryptic songbook list into plain titles.
Many Thanks Bill