JT,
When you want to SAVE a setup you have done to a
REGISTRATION MEMORY you first have to press the
MEMORY button.
On my Tyros 4 it is here:
You then press the
REGISTRATION MEMORY you want to SAVE it to (ie.
1,
2,
3,
4 etc.).
But before you do that, check the box that comes up when you press that MEMORY button, as the keyboard will only SAVE what you tell it to SAVE (ie. it will only SAVE the items that are 'ticked').The one that must be ticked to SAVE the ACMP button (or not) is the STYLE one. To do this you highlight the one you want by moving the highlighted bar UP or DOWN, and then pressing the appropriate ON/OFF button on the right (top for ON, and bottom for OFF).
The advice from Tyros Tipsters is to make sure all those boxes are ticked .. and that is what I have done (as above). So your keyboard will then just save everything every time. I can't see why you need to choose what you want to SAVE every time you do it, so just set it up for the lot.
JT .. On your PSR-SX900 you just touch those boxes in order to turn them ON or OFF.
The screen
you will see is below. Note that in this screen the
Multi Pad is not ticked. Therefore, if you tried to SAVE a MULTI PAD to your REGISTRATION Setup, it would not do it. That is why I say tick ALL the boxes and then you don't have to worry about whether something will be SAVED or not. (But equally, Den says that the SX900 hasn't got
unlimited USER MEMORY, so maybe don't fill it up with things you don't want.)
Hugh