dentyr wrote:Hello Fred. Here’s the next problem. I set Ambient Piano in R1, Set Accordion in R2 and the Foxtrot from the Genos Easy play on button 1.
1] I want that style to stay there when I change to button 2 with Ambient Piano and strings so I press the freeze button as I did on tyros. Sure the style stays but the voices stay also. Take the freeze off and the voices change but so do the style to the foxtrot on the Ballroom section of the SX700.
2] What I am looking for; set the Genos foxtrot on button 1 with the piano and accordion. Set piano and strings with the SX700 foxtrot from the ballroom. OK, now I play with the freeze on, press button 2 and the voices should change but not the style. Take the freeze off and press button 2 again and the voices stay but the style changes.
Playing with this is not as difficult as it sounds.
These are the frustrations that I have.
I have pressed the Memory button and ticked and unticked all the squares in all the combinations that I can think of but to no avail.
Sorry to be a pain but the frustrations start to get at me near midnight.
Kind regards, Den.
Hi Denn
First of all Assignable Buttons
Push Direct Access Button followed by the button you wish to setup.
You will see the button (on screen) is highlighted.
Tap the highlighted button on screen
This will bring up a Menu find the setting you want and select it.
At the top of the screen you will see a tab marked "Menu" - tap this
Turn off the section that related to popup menu then exit.
Full instruction page 111 of Reference Manual.
Now Registrations.
First off though you appear to contradict yourself when describing what you are after. 1 & 2 above in the quote appears to want different things.
Call up the registration you want and select Button one.
Make sure everything is as you want for Button 1
Turn OFF the OTS Button.
Now setup the voices that you want for button 2 - Don't touch any thing like styles
Once you are happy with your selection push the Memorise button
Now select the parameters you want to save.
Now push Registration button No. 2
Follow this by pushing button 2 and check again that things are as you want.
Repeat to the other buttons as required.
Now SAVE the registration Bank and confirm that you want to over write the original.
Regards
Fred