by dentyr » 18 Aug 2020 13:16
Hello, In the Mixing console you can change the settings for the chorus and reverb. There is a button on the right side which brings up the settings. This sets the basic settings, the variations can be found on the wheels on the opening page of the mixing console.
Press "Direst Access" button then the Variation button, (top right button). This brings up the mixing console. In the top left is a box which shows the block etc. The F button will bring up the "parameters" which you can change (if you dare!).
Regards,Den.
Keyboards: Yamaha Tyros 4, PSR SX700, PSR S970and StagePa300
I knit dolls and animal toys.I always try to do things which I can't do in order to learn how to do them. ..
Werk maakt je vrij. Muziek maakt je blij. Work sets you free. Music makes you happy.
..
Challenge Winner
2020 September (Joint Winner); November
2021 May (Joint Winner)
2023 May; August (Joint Winner)